SPECIFICATIONS

Brand Name: QNCX

Choice: yes

Current: 10A

EU LVD Voltage: Low voltage: Below 50Vac or 75Vdc

High-concerned chemical: None

Item Type: SWITCHES

Material: Plastic

Origin: Mainland China

Product Operation Instructions

Clearing and Pairing

(Note: If you need to replace function of the same controller, please perform the clear code operation first.)

Working Mode Description:

Clear Code Function:

Press the pairing key on the control 8 times continuously, the LED indicator light will flash 8 times, and at this time the LED indicator light will automatically flash 8 times continuously, then the clear code is, and all the previously learned remote control key codes are cleared.

Tap Mode:

Press the "A" key on the remote control, the relay opens, the "A" key on the remote control, the relay closes. If you keep pressing the "A" key on the remote control, the relay will always be open, and relay will close when you release the remote control.

Self-lock Mode:

Press the same remote control key once, press it once, the relay opens, press again, the relay closes.

Interlock Mode:

Press the "A" key on the remote control, the relay opens, press the "B" key on the control, the relay closes.

How to Set the Working Mode of the Controller:

Set the Tap Mode:

Press the learning key on the controller once, LED indicator light on the controller will flash and then light up, wait for the LED indicator light to light up and then press the remote control key that needs to be paired, LED indicator light on the controller will flash 3 times continuously and then go out, the pairing is successful.

Set the Self-lock Mode:

Press the learning on the controller twice continuously, the LED indicator light on the controller will flash and then light up, wait for the LED indicator light to light up and then press the remote control key needs to be paired, the LED indicator light on the controller will flash 3 times continuously and then go out, the pairing is successful.

Set the Interlock Mode:
Press the pairing key on the control board 3 times continuously, the LED indicator light on the controller will flash and then light up, wait for the LED indicator light to light and then press the remote control key "A" to set it to open, the LED indicator light on the controller will flash and then remain lit, continue to set the remote control "B" to set it to close. The controller LED flashes and goes out, the setting is complete.

(When selecting the interlock working mode, you need to two different keys of the remote control, the first remote control key learned will be automatically set as "open", and the second remote control key learned will be automatically set as "".)

Precautions

1. High voltage danger, pay attention to insulation protection, avoid electric shock.

2. Please replace the battery in time when remote control voltage is insufficient (when the remote control battery voltage is insufficient, the general remote control distance becomes close).

3. When using wireless electronic products, pay attention avoid metal masks, large electronic equipment, electromagnetic fields and other strong interference sources, to avoid the remote control and receiver distance is short or can not work normally