220V Smart COB Strip LED Neon Light 10M 20M 30M 288Leds/m WIFI Bluetooth Dimmable Tape IP67 Waterproof Rope For Room Outdoor

220V Smart COB Strip LED Neon Light 10M 20M 30M 288Leds/m WIFI Bluetooth Dimmable Tape IP67 Waterproof Rope For Room Outdoor

Product Type: 220V COB Led Strip Light
Lamp beads: COB(288 LEDs/meter)
Color Temperature: Warm White(3000K-3500K); Neutral White(4000K-4500K); Cold White(6000K-6500K) ;
Waterproof Rate:IP65 Waterproof
Working Voltage:AC220V(With EU Power plug)
Cuttable: every 50cm can be cut
Strip Size: W10mm x H5mm
Color rendering index:CRI >= 85RA
Power: 8-10W/meter

Applications:

Indoor lighting for Living room Bedroom,hallways, stairs, trails ,windows,kitchen;
Decorationfor hotels, clubs, shopping malls;
Outdoor lighting for garden ,building, square, Archway, bridge edge lighting, Security Emergency lighting, DIY ad sign lighting

WIFI Instructions:

1. Scan the QR code of the product to download the APP and register the account.
2. Connect the controller and LED light strip, and switch on the power supply.
3. Open the Tuya Smart App and click Add Device (reset the device, switch the power on and off 3 times, (Power on, power off, power on, power off, power on), enter the flash state and complete the network distribution operation within 3 minutes). Select Lighting → Light Strip → Confirm the indicator is in flash, enter WiFi password → Click Next → Connection is added successfully → Click Finish to complete the product network distribution.
4. Enter the APP main interface in five parts: on/off, white light brightness adjustment interface, scene, plan, and Settings.
① Enter the white color ring interface to adjust the light brightness.
② When entering the scene interface, you can freely select different scenes. The scene can be edited and set, such as the light mode can be set to static, jump, breath, etc., and the scene can be freely named.
③ Enter the schedule interface (you can select the timing type, sleep and wake up)
④Enter the setting interface for timing (lights off, lights on, lights on and dimming, lights on and setting scene), countdown (delayed lights off), power response.

Bluetooth Instructions

1. Scan the QR code of the product to download and install the APP. APP name: Trick Light, applicable to mobile phone operating system: IOS version 6.0 or Android version 4.3 or above, software language: English, Chinese, automatic language recognition according to the operating system.
2. Open Trick Light APP of mobile phone, connect LED Light bar and dimmer correctly, power on, software will automatically scan Bluetooth device, and automatically connect the device. Use APP or remote control to make the controller work as required.
3. When installing the infrared controller, the remote receiver should be installed in the position without obstacles to avoid remote control failure. RF radio frequency remote control is not restricted by obstacles.

23Key IR

1.Correctly connect the lamp belt to the controller to ensure that there is no short circuit, otherwise the controller will be burned.
2. Power plug power on, operate the remote control can be carried out in accordance with the needs of the controller to work.

Notice
1. The input voltage of this product is AC110 / 230V
2. The standard warranty is one year. Our company won’t be responsible for any damage of the controller due to any wrong operation.

ON OFF Swith